A plug, two USB ports, and no PC
The bridge is the whole of the on-site installation. It opens one outbound connection and keeps it alive, so print jobs can reach the counter without anything being opened in the firewall.
One per location, not one per printer. Shipping within the EU is included; ask about larger numbers and we will look at it properly.
excl. VAT
What is in it
- Network
- Wi-Fi 2.4 GHz or Ethernet
- Printers
- Two USB printers per bridge
- Speaks
- DYMO LabelWriter and ESC/POS
- Connection
- Outbound websocket, nothing inbound
- Updates
- Remote, and rolls back if one fails to start
- Offline
- Serves its printers on the local network too
- Power
- USB-C, a few watts
- Setup
- Plug in, name it, pair from the dashboard
Or use a computer that is already there
The bridge also exists as software, for a Mac, a Linux machine or a Raspberry Pi. Same protocol as the hardware: begin on the machine you have, swap to a bridge when you want the machine gone.
On Windows it is not ready yet: today it is a script you start yourself, and a proper Windows app is being built. Ask us and we will walk you through the current route.
The bridge, for a counter
At a counter, in a kitchen, in a warehouse — anywhere a computer would be one more thing to switch on, update and restart.
The software, for a desk
Where a computer is standing anyway and is not going to be switched off — a back office, a workshop, a developer’s desk while building.
You do not need one to start
Every account comes with a virtual bridge. It accepts jobs, renders them exactly as a real printer would, and shows you the result in the dashboard. Integrate first, order the hardware once it works — that way the box arrives at a counter where the software is already finished.
Start free — 200 printsOr build your own
The firmware is an ESP-IDF project for the ESP32-S3, and the server ships as a Docker image. If you would rather run the whole thing on your own hardware and your own network, nothing here stops you.
Read the documentation →